Diving head first into the shallow pool of Amazon Advertising

D

I independently published my first book in 2004, and since then, I’ve tried all sorts of services and gimmicks to turn them into best sellers. BookBub, email lists, Facebook ads, Twitter ads, Goodreads ads (when they were still a thing), and after sixteen years, I can tell you that the only ad channel that ever produced meaningful results was Amazon Advertising. And that’s why, for the launch of Brigham Plaza, I’ve decided to go all-in on Amazon. While that might sound reasonable, please keep in mind that I have no idea what I’m doing.

I won’t detail my frustrations but suffice to say I’ve never really cracked Amazon Ads.

David Gaughran, How to Sell Books in 2020 – Pandemic Edition

Well, at least I’m in good company. In this post, we’ll explore what it takes to launch an advertising campaign for a newly released dystopian cyber-thriller. I’m a big believer in just try something, even if it doesn’t work. It is my hope that you can stand on the smoldering ashes of my failure and achieve your own success. Just be sure to let me know where I went wrong.

Getting Started

Head on over to advertising.amazon.com and set up an account. If you’re selling books, you’ll want the I have a KDP account option. Once you’re in, click + Create a portfolio under the Portfolios heading on the sidebar. I named mine Brigham Plaza because that is what I’m advertising. This is likely the last question I’ll get 100% correct.

Click into the new portfolio. Now we’re ready to create campaigns. Surprisingly, there are a lot of options when it comes to campaigns, so we’re going to create multiple to see which work the best. We can always come back later and disable the lower performing ones.

Create Campaign

Click Create Campaign. Your first option is to choose a campaign type. Amazon describes them thusly:

  • Sponsored Products – Promote products to shoppers actively searching with related keywords or viewing similar products on Amazon.
  • Lockscreen Ads – These ads are based on shoppers’ interests and are shown when they ‘unlock’ their Kindle E-readers or Fire Tablets to begin reading or shopping for books.

Today, we’re just going to focus on Sponsored Products, so click Continue under that heading.

Settings

I used the following settings:

  • Campaign name: Launch TBD
  • Portfolio: Brigham Plaza
  • Start: 8/31/2020
  • End: 9/30/2020
  • Daily Budget: $20

$20 per campaign per day for 31 days may seem like a lot, but I have a feeling that successful authors are paying a lot more. And besides, I told you we were going all-in (adjust to your comfort level).

The first real choice we find is Targeting.

  • Automatic: Amazon will target keywords and products that are similar to the product in your ad. (Use this strategy when you are first getting started or want to launch a campaign quickly.)
  • Manual: Choose keywords or products to target shopper searches and set custom bids. (Use this strategy when you know which keywords deliver the most value for your business.)

We’re going to do both, but for Variation 1, we’re going to choose Automatic. Amazon recommends this when you’re getting started, and that’s because they will choose keywords for you and show you how they perform. You can then focus on those keywords in later campaigns to increase ROI.

For example, I used Automatic Targeting with Hybrid Mechanics. Amazon recommended a bunch of keywords related to SF and cyberpunk, but the keyword that got the most clicks was zombies. Of course, there are no zombies in Hybrid Mechanics, and that keyword resulted in zero sales despite costing the majority of the advertising budget for the click.

Campaign bidding strategy

This is probably the most daunting section. How do you want to bid on ad placements? Here are the options:

  • Dynamic bids – down only – We’ll lower your bids in real time when your ad may be less likely to convert to a sale. Any campaign created before April 22, 2019 used this setting.
  • Dynamic bids – up and down – We’ll raise your bids (by a maximum of 100%) in real time when your ad may be more likely to convert to a sale, and lower your bids when less likely to convert to a sale.
  • Fixed bids – We’ll use your exact bid and any manual adjustments you set, and won’t change your bids based on likelihood of a sale.

All that makes perfect sense, doesn’t it? My gut reaction is to go with the second option, Dynamic bids up and down. It’s not that I necessarily trust Amazon to decide when my ad is most likely to convert to the sale, but the help text sort of implies that the other two have the potential of leaving sales on the table. Fixed bids means paying the same even when the chance of a conversion is low. Dynamic down may save money, but it doesn’t go after the so-called “more likely conversions.” How Amazon determines that, I have no idea.

Since we’re doing a daily budget, Amazon bidding more on our behalf just means we reach our daily spend faster, meaning less impressions, clicks, sales, etc.

I hate to say it, but I think we have to trust Amazon and go with dynamic up and down.

Money’s no object, right? (Please tell me you’ve been budgeting / setting aside this ad spend for months now…)

Adjust bids by placement

There’s another option here to PAY EVEN MORE to advertise (up to 900%). For the sake of my son’s college education, we’re going to leave this alone for now. I could, however, see the value in paying more to be shown at top of search. 900% more value? Probably not.

Ad Format

Here we come to another choice. Do you want to display custom text with your ad? Or just plop it down on the page? If you want custom text, you’ll be limiting yourself to one product per campaign. Since we’re only advertising one book, that’s fine.

For Variation 1, we’ll use Custom text ad.

Products

You should see a list of your books. Find the one you want to advertise and click Add. Note that it lists print and Kindle books separately. For all of these campaigns, I’ll be pushing people to the Kindle product page. Why? Because Kindle versions of my books outsell print 20 to 1, and that’s probably too low of an estimate. If that’s not your experience, you could use your print product here instead, but I don’t think it really matters. It’s essentially the same page with the same reviews.

Automatic Targeting

This section’s another doozy. We need to set a default bid. At this point in the process, this field has been filled in automatically with $0.75. But, there’s also help text below that reads Suggested bid: $0.59 ($0.44-$0.92) because that’s not confusing at all.

I’ll be perfectly honest. I have no idea where these numbers come from. But rather than sit and stew about it, we’re just going to try something, because that’s how stuff gets done.

Let’s split the difference between .44 and .92 and round up to 70. Are those five fewer cents per bid going to screw us later? There’s only one way to find out!

There’s also another section for setting bids by targeting group, but we’re going to save that for another lifetime.

Negative keyword / product targeting

As I mentioned in my Hybrid Mechanics zombies example, you may want to avoid your book appearing in certain searches or with certain products. We’re going to do this after the fact because we don’t know yet which keywords are going to perform so poorly as to endanger the entire campaign. We’ll come back and adjust these later.

Creative

Here’s your chance to shine! We chose Custom Text earlier, so now you get 150 characters to sell your book to the masses. What do you write? What don’t you write?

No pressure. Oh, and you only get one blurb per campaign!

If I had to guess, I would say that the ad blurb is a place where you’d want to reinforce the keywords. They searched for hacker? Well look, it says hacker right here in this ad.

I think I’ll go with something simple: The data arrived first, followed by the money, and then finally the pain. It could only mean one thing: the notorious hacker Johnny San Vito was dead. That’s exactly 150 characters. Perfect.

Before settling on text, you can view what other people chose by visiting any book product page on Amazon.

Just look for the Sponsored box under the book description.

Other examples include:

  • A thriller with an unforgettable twist
  • The future has arrived.
  • The end of the world was only the beginning…

Choose a blurb you like and hit Launch Campaign. Then click Go to campaign manager. Amazon will need to review and approve the ad before it goes live, so let’s go create the rest of the ads.

Manual Targeting

For my second campaign, I’m going to choose Manual targeting instead of Automatic. This opens up a few more choices.

Targeting

The options here are Keyword vs Product, but it reads more like Search vs Product, and to be honest, I’m not sure what the better choice is. I lean toward Product, because personally, I don’t ever go to Amazon to search “ghost” or “hacker.” I search for Stephen King or Richard K. Morgan and Amazon shows me related books.

I’ll try both.

Keyword Targeting

Yikes. This one got complicated real fast. In this box, you can click Enter list to add your own keywords. One thing I noticed is that all of the terms I chose sounded very generic. Hacker. Cyberpunk. I’m not confident these are the right keywords to be using, or whether keywords themselves are a good strategy.

Once you add some keywords, you’ll see a list on the right where you can adjust the bid for each one. That’s right, you’ll pay more to show up when a user types “robots” versus when they type “hacker.”

Actually, sitting here, looking at this nonsense, I’ve talked myself out of keywords. It’s not like I’m selling a self-help book. It just needs to be on the shelf in the Science Fiction section of the bookstore.

Abandon ship!

Product Targeting

Ah, now this makes much more sense. Choose some categories where you want your book to show up. I suppose if you want to piggyback on another book, you can choose Individual Products, but I’m sticking with Categories.

There’s definitely an urge to go wide and just target /Books/Science Fiction & Fantasy, but do you really want your hacker magnum opus showing up with Lord of the Rings? There may be some crossover between those crowds, but better this book show up with the likes of Neuromancer, Altered Carbon, and Snow Crash.

It’s interesting that Dystopian has a much higher Suggested Bid than Cyberpunk. This is one spot where I’m actually going to adjust the bids a little to prefer Cyberpunk over the other two.

Final Variations

So far, I’ve got two campaigns: the same custom text ad with manual and automatic targeting. I’m going to duplicate those and take out the custom text, just to see how a straightforward “just the cover” strategy works. As the days progress, it should become clearer which choice has the better ROI, and I’ll adjust budgets accordingly.

Lockscreen Ads

I decided to throw on a Lockscreen Ad just to see what it was like. Instead of a daily budget, you get a lifetime budget, along with the option to run the campaign as quickly as possible or spread it out evenly. Since I haven’t tried these types of ads before, I gave it a relatively low lifetime budget and CPC bid. I also chose to run the campaign as quickly as possible; let’s get this new release in front of as many people as possible quickly.

Instead of keywords and categories, you target Interests. Oddly enough, there’s no Cyberpunk option here, just Science Fiction, Dystopian, and Adventure. Oh well.

Final Thoughts

Three hours later, and my wallet already hurts. Still, having gone through most of the options available, I’m happy with the choices I’ve made for this initial push. Amazon Ads seem daunting precisely because there are so many options, and the only way to really understand them is to try something.

Are you going to fail along the way? Yes.

Are you going to waste a lot of money along the way? Double yes!

But don’t beat yourself up. You’re an artist, not an advertising guru. You create worlds on paper. You brain is built for creativity, not understanding the vagaries of ROI and CPC averaging. Let’s leave this stuff for people who enjoy it: sickos.

The ads go live on 8/31. We’ll check on them at the end of next week and see how they performed.

About the author

Daniel Verastiqui

Daniel Verastiqui is a Science Fiction author from Austin, Texas. His novels explore relationships and identity in the context of ubiquitous technology, pervasive violence, and frequent nudity. His most recent book, Brigham Plaza, is now available in print and digital formats on Amazon.

3 comments

Leave a Reply to Daniel Verastiqui Cancel reply

photo of Daniel Verastiqui and his writing partner Jetson

Hi.

I'm Daniel Verastiqui.

This is my blog.

I'm a Science Fiction author, so I mostly post about my experiences with writing, publishing, marketing, and self-loathing.

Be sure to check out my books at Amazon!

Here are some of my latest posts

%d bloggers like this: