With the bigger painting job out of the way, it was time to concentrate on the deco wall. The first order of business was to build the shelf at the top.
I used some of the same MDF board (though with less width) and placed it on top of the main crossbeam. That created a little nook, so I filled it with some cove molding. The lip of the shelf and the cove molding aren't flush, but I like it. Probably would have looked weird your way, you perfectionist.
In the shot above, you can see I went ahead and primed the slats as well as the cove molding. The finishing paint is pure white, so I wanted to make sure none of the yellow showed through.
There was still some weird, dark splotches on the wall between the slats, so I went ahead and added another layer of smoothing compound. Then it was time to paint with a tiny little roller, which was ridiculous.
It should be noted that everything hurt to do it. Holding up the boards, applying joint compound, painting with a brush... everything!
After two coats of paint, it was time to work on the caulking, which again A) hurt and B) took forever. Isn't that stuff toxic? And there I was just dragging my finger through it over and over again. Still, it wasn't until the caulk went on that this started looking like something real. Before it kind of had a detached quality. Now it looks like part of the wall, which is nice.
It looks really yellow in my pictures. It's not yellow. Calm down.
I started running out of steam on this project towards the end, which caused me to not be as meticulous as I should have been. Had Dom not been busy growing our baby, it would have helped to have her directing me. She's so much better at the finer details.
Also, the wall is still white. Not yellow. Seriously, cool your yellow jets.
All in all, I give this project a solid C. It just needed something more. The walls could have been a little grayer, and the white could have popped more. Also, I totally wasn't sure what to do at the bottom. With the Drop Zone, we pulled off the baseboards and replaced them with MDF. Probably should have done that again. Next baby.
I was excited to move some of the furniture in as quickly as possible, just to see how it will look. Again, this caused me great disappointment in my craftsmanship. Hopefully, baby won't mind.
So this is it. Baby Verastiqui's nursery. That crib is where our baby will sleep.
How fucking awesome is that? Truly fucking awesome, if you ask me.