DIY Gladiator Garageworks Mini-rails

Because the price of rails is too damn high!

If you called me up and said Hey Daniel, these guys are gonna kill me unless you cut me some French cleats free-hand with a circular saw, I would calmly reply well you better go to your happy place because you’re about to get straight-up murdered.

After viewing April Wilkerson’s French Cleat System video, I thought to myself maybe this is the excuse I need to finally get a table saw! But at over $300 for a good one, I decided to put off this purchase and try doing the 45-degree length-wise cuts myself. As you can see from the photo above, I failed miserably.

Dejected, I decided to just order some new bins for my existing Gladiator Garageworks system ($). As I was adding the new rails (which honestly aren’t that expensive), I realized they are overkill for what I wanted.

So I just ordered the bins direct from Whirpool (Amazon doesn’t have them in stock) and waited for them to arrive.

Then, PROJECT!

Measuring for mini-rails

Since screws and nails don’t weigh that much, we don’t need the full Gladiator rail system. All we really need is a lip on a mount. Lip on a mount. Lip on a mount.

That’s fun to write.

Cut the lips

I had some scrap wood (I think 1/4"?) that fit nicely into the tabs on the back of the bins. So I cut those into 2 1/4" strips.

Man that scrap wood is terrible. Splintering all over the place. Thank god for eye protection.

You should test the fit of the scraps you cut. If you want to be fancy-pants, you can make the strips actually fit snugly. It’s a game of eights though, so be careful or you’re gonna have to do some sanding.

Cut the mounts

Use a thicker piece of scrap to cut the mounts. I believe I chose a 1/4" as the lip depth, but who knows at this point? I wasn’t really keeping track.

Glue those bastards together. On the first rail, I used the smallest screws I could find. Then I discovered you can use brad nails, which is so much more fun! Find the shortest brads and put one in each end. Then cut the excess off with some dikes.

Make sure you use some glue. That’s what all the pros are always saying, anyway.

Repeat the process

Build as many rails as you want. I did six before I got really bored with this project and wanted to go inside to play video games.

Find a place to mount the rails

Again, stealing an idea from April, I decided to mount the rails on the inside of the door to my water heaters. That would keep them out of sight and make the garage look cleaner. Double win.

Take note that if you’re gonna do this, you have to account for the lip on the doorjamb as well as the length of the bin (where it might hit another door or jamb as it closes). I was able to fit 4 of the Gladiator bins on each row under these constraints.

Done!

After mounting all the rails and the bins, take a step back and admire your work.

Do not be fooled by the angle of the picture. I assure you they’re level. Probably.

24 new bins for holding stuff! How exciting. I was running out of space in my old bin storage unit. If I fill up these guys, I’ll repeat the process on the other door. Now you know.

Alright, I think that’s enough BSIY posts for this year. I should probably get back to writing a new book or--gross--exercise.